Din Rail 4 Relay receiver
Applications
- Any application where a relay contact is needed (up to 1 amp)
- Home automation applications
- Factory automation and other industrial applications
- Garage doors (inside only)
- Factory control
- Robotic control system
4 relay din rail relay receiver characteristics:
- 4 common relay (ARM) contacts.
- 4 Normally open (NO) contacts.
- 2 Normally Closed (NC) contacts
- Input Voltage 12Volts DC to 30Volts DC. Board only says 12Volts DC but the regulator is rated up to 30 Volts DC.
- 1 Amp of current or less is best.
Relay contacts characteristics:
- Contact rating = 1A
- Switching Voltage =125VAC, 110VDC – Max
- Coil Type = Non latching
- Operating Temperature = -40 degrees C ~ 70 degrees C
- Coil Resistance = 178 Ohms
Features
Removable terminal strip connector.
2 common/normally open/normally closed contacts
2 common/normally open contacts
4 relays total
Power input of +12 volt to +24 volts DC.
+5 volt input available on special order.
Contacts rated at 1 amp DC or 30 ma AC
Will work with any of our external infrared sensors.
Currently used for more than 10 years to control various devices like elevators, speed doors, folk lifts.
This same circuit design has been working for more than 20 year in a cold mine to switch train tracks.
Also used by sever of the major auto manufacturer in the United States for control of car testing equipment.